Archives: Recommendations

EcoCare’s 100% natural and environmentally responsible products are highly-effective at both trapping odours and dissolving blockages in drains.

EcoCare All Clear contains readily biodegradable surfactants and naturally derived dirt and grime digesting microbes that will trap odour causing molecules and quickly break down blockages.

There’s no need for harsh, chemical-based drain cleaners, especially if you’re on a septic or AWTS. EcoCare products are completely septic safe, environmentally responsible and non-hazardous for you and your family.

EcoCare’s 100% natural and environmentally responsible products are highly-effective at both trapping odours and dissolving blockages in drains.

EcoCare Kitchen Clear contains readily biodegradable surfactants and naturally derived fat, oil and grease digesting microbes that will trap odour causing molecules and quickly break down blockages.

There’s no need for harsh, chemical-based drain cleaners, especially if you’re on a septic or AWTS. EcoCare products are completely septic safe, environmentally responsible and non-hazardous for you and your family.

New septic or AWTS systems need to be seeded with the right types of bacteria so that the system is able to quickly reach optimal bacterial populations and efficiently digest waste. Similarly, after a pump out, systems need to be reseeded with bacteria so that they can return to peak performance.

To ensure the specialty bacteria are able to quickly reach healthy populations, our solutions contain the micro and macro nutrients required for the beneficial bacteria to rapidly multiply and grow.

“I was struggling with my septic system when I first moved here from the city. EcoCare helped me with advice, and then the Activator product. I used the product for some years, very successfully, got complacent, but I have recently started using it again. I am so happy with the product that I won’t ever get complacent again.”

– Lynn Takayama

Your solution

To seed and kickstart your septic or AWTS with a household of 6 or more, we recommend the following products and dosage. Consistent application will ensure you live odour, blockage and worry-free.

Product

EcoCare Activator 20L
EcoCare Enhancer Kit AB

Dosage Instructions

Step 1
On the 1st morning of treatment, mix the contents of the EcoCare pH Stabiliser sachet with 1 litre of cold water, pour the mixture into the toilet and flush – the mixture may not dissolve fully and it could take a few flushes before the toilet is clear. 

Step 2
In the evening, pour the contents of the EcoCare Culture AB bottle into the toilet and flush.

Step 3
The following morning, add 4 litres of EcoCare Activator down the toilet leading into the system to kick-start the natural bacteria and waste breakdown process. 

Step 4
Add a total of 750ml of EcoCare Activator down the toilet each week to ensure your system stays healthy. 20L of EcoCare Activator will ensure your system starts smoothly and provide treatment for 21 weeks.

New septic or AWTS systems need to be seeded with the right types of bacteria so that the system is able to quickly reach optimal bacterial populations and efficiently digest waste. Similarly, after a pump out, systems need to be reseeded with bacteria so that they can return to peak performance.

To ensure the specialty bacteria are able to quickly reach healthy populations, our solutions contain the micro and macro nutrients required for the beneficial bacteria to rapidly multiply and grow.

“I was struggling with my septic system when I first moved here from the city. EcoCare helped me with advice, and then the Activator product. I used the product for some years, very successfully, got complacent, but I have recently started using it again. I am so happy with the product that I won’t ever get complacent again.”

– Lynn Takayama

Your solution

To seed and kickstart your septic or AWTS with a household of 5, we recommend the following products and dosage. Consistent application will ensure you live odour, blockage and worry-free.

Product

EcoCare Activator 20L
EcoCare Enhancer Kit AB

Dosage Instructions

Step 1
On the 1st morning of treatment, mix the contents of the EcoCare pH Stabiliser sachet with 1 litre of cold water, pour the mixture into the toilet and flush – the mixture may not dissolve fully and it could take a few flushes before the toilet is clear. 

Step 2
In the evening, pour the contents of the EcoCare Culture AB bottle into the toilet and flush.

Step 3
The following morning, add 4 litres of EcoCare Activator down the toilet leading into the system to kick-start the natural bacteria and waste breakdown process. 

Step 4
Add a total of 625ml of EcoCare Activator down the toilet each week to ensure your system stays healthy. 20L of EcoCare Activator will ensure your system starts smoothly and provide treatment for 26 weeks.

What makes our products different?

Whilst we know specialty bacteria are essential for system seeding, we know that the underlying cause of most wastewater issues are poor biological conditions within the system that kill the bacteria necessary for waste breakdown. 

Our solution contains specialty bacteria as well as nutrients, minerals and amino acids that allow these bacteria to rapidly multiply. 

EcoCare’s Biological Stimulant Technology introduces select nutrients, minerals and amino acids that improve biological conditions, overcome the damage caused by everyday household chemicals and allow beneficial bacteria to maintain healthy populations. This is what allows septic systems to operate at peak performance and minimises the need for pump outs and expensive repairs.

New septic or AWTS systems need to be seeded with the right types of bacteria so that the system is able to quickly reach optimal bacterial populations and efficiently digest waste. Similarly, after a pump out, systems need to be reseeded with bacteria so that they can return to peak performance.

To ensure the specialty bacteria are able to quickly reach healthy populations, our solutions contain the micro and macro nutrients required for the beneficial bacteria to rapidly multiply and grow.

“I was struggling with my septic system when I first moved here from the city. EcoCare helped me with advice, and then the Activator product. I used the product for some years, very successfully, got complacent, but I have recently started using it again. I am so happy with the product that I won’t ever get complacent again.”

– Lynn Takayama

Your solution

To seed and kickstart your septic or AWTS with a household of 4, we recommend the following products and dosage. Consistent application will ensure you live odour, blockage and worry-free.

Product

EcoCare Activator 20L
EcoCare Enhancer Kit AB

Dosage Instructions

Step 1
On the 1st morning of treatment, mix the contents of the EcoCare pH Stabiliser sachet with 1 litre of cold water, pour the mixture into the toilet and flush – the mixture may not dissolve fully and it could take a few flushes before the toilet is clear. 

Step 2
In the evening, pour the contents of the EcoCare Culture AB bottle into the toilet and flush.

Step 3
The following morning, add 4 litres of EcoCare Activator down the toilet leading into the system to kick-start the natural bacteria and waste breakdown process. 

Step 4
Add a total of 500ml of EcoCare Activator down the toilet each week to ensure your system stays healthy. 20L of EcoCare Activator will ensure your system starts smoothly and provide treatment for 32 weeks.

What makes our products different?

Whilst we know specialty bacteria are essential for system seeding, we know that the underlying cause of most wastewater issues are poor biological conditions within the system that kill the bacteria necessary for waste breakdown. 

Our solution contains specialty bacteria as well as nutrients, minerals and amino acids that allow these bacteria to rapidly multiply. 

EcoCare’s Biological Stimulant Technology introduces select nutrients, minerals and amino acids that improve biological conditions, overcome the damage caused by everyday household chemicals and allow beneficial bacteria to maintain healthy populations. This is what allows septic systems to operate at peak performance and minimises the need for pump outs and expensive repairs.

New septic or AWTS systems need to be seeded with the right types of bacteria so that the system is able to quickly reach optimal bacterial populations and efficiently digest waste. Similarly, after a pump out, systems need to be reseeded with bacteria so that they can return to peak performance.

To ensure the specialty bacteria are able to quickly reach healthy populations, our solutions contain the micro and macro nutrients required for the beneficial bacteria to rapidly multiply and grow.

“I was struggling with my septic system when I first moved here from the city. EcoCare helped me with advice, and then the Activator product. I used the product for some years, very successfully, got complacent, but I have recently started using it again. I am so happy with the product that I won’t ever get complacent again.”

– Lynn Takayama

Your solution

To seed and kickstart your septic or AWTS with a household of 3, we recommend the following products and dosage. Consistent application will ensure you live odour, blockage and worry-free.

Product

EcoCare Activator 20L
EcoCare Enhancer Kit AB

Dosage Instructions

Step 1
On the 1st morning of treatment, mix the contents of the EcoCare pH Stabiliser sachet with 1 litre of cold water, pour the mixture into the toilet and flush – the mixture may not dissolve fully and it could take a few flushes before the toilet is clear. 

Step 2
In the evening, pour the contents of the EcoCare Culture AB bottle into the toilet and flush.

Step 3
The following morning, add 4 litres of EcoCare Activator down the toilet leading into the system to kick-start the natural bacteria and waste breakdown process. 

Step 4
Add a total of 375ml of EcoCare Activator down the toilet each week to ensure your system stays healthy. 20L of EcoCare Activator will ensure your system starts smoothly and provide treatment for 43 weeks.

What makes our products different?

Whilst we know specialty bacteria are essential for system seeding, we know that the underlying cause of most wastewater issues are poor biological conditions within the system that kill the bacteria necessary for waste breakdown. 

Our solution contains specialty bacteria as well as nutrients, minerals and amino acids that allow these bacteria to rapidly multiply. 

EcoCare’s Biological Stimulant Technology introduces select nutrients, minerals and amino acids that improve biological conditions, overcome the damage caused by everyday household chemicals and allow beneficial bacteria to maintain healthy populations. This is what allows septic systems to operate at peak performance and minimises the need for pump outs and expensive repairs.

New septic or AWTS systems need to be seeded with the right types of bacteria so that the system is able to quickly reach optimal bacterial populations and efficiently digest waste. Similarly, after a pump out, systems need to be reseeded with bacteria so that they can return to peak performance.

To ensure the specialty bacteria are able to quickly reach healthy populations, our solutions contain the micro and macro nutrients required for the beneficial bacteria to rapidly multiply and grow.

“I was struggling with my septic system when I first moved here from the city. EcoCare helped me with advice, and then the Activator product. I used the product for some years, very successfully, got complacent, but I have recently started using it again. I am so happy with the product that I won’t ever get complacent again.”

– Lynn Takayama

Your solution

To seed and kickstart your septic or AWTS with a household of 2, we recommend the following products and dosage. Consistent application will ensure you live odour, blockage and worry-free.

Product

EcoCare Activator 10L
EcoCare Enhancer Kit AB

Dosage Instructions

Step 1
On the 1st morning of treatment, mix the contents of the EcoCare pH Stabiliser sachet with 1 litre of cold water, pour the mixture into the toilet and flush – the mixture may not dissolve fully and it could take a few flushes before the toilet is clear. 

Step 2
In the evening, pour the contents of the EcoCare Culture AB bottle into the toilet and flush.

Step 3
The following morning, add 4 litres of EcoCare Activator down the toilet leading into the system to kick-start the natural bacteria and waste breakdown process. 

Step 3
Add a total of 250ml of EcoCare Activator down the toilet each week to ensure your system stays healthy. 10L of EcoCare Activator will ensure your system starts smoothly and provide treatment for 24 weeks.

What makes our products different?

Whilst we know specialty bacteria are essential for system seeding, we know that the underlying cause of most wastewater issues are poor biological conditions within the system that kill the bacteria necessary for waste breakdown. 

Our solution contains specialty bacteria as well as nutrients, minerals and amino acids that allow these bacteria to rapidly multiply. 

EcoCare’s Biological Stimulant Technology introduces select nutrients, minerals and amino acids that improve biological conditions, overcome the damage caused by everyday household chemicals and allow beneficial bacteria to maintain healthy populations. This is what allows septic systems to operate at peak performance and minimises the need for pump outs and expensive repairs.

New septic or AWTS systems need to be seeded with the right types of bacteria so that the system is able to quickly reach optimal bacterial populations and efficiently digest waste. Similarly, after a pump out, systems need to be reseeded with bacteria so that they can return to peak performance.

To ensure the specialty bacteria are able to quickly reach healthy populations, our solutions contain the micro and macro nutrients required for the beneficial bacteria to rapidly multiply and grow.

“I was struggling with my septic system when I first moved here from the city. EcoCare helped me with advice, and then the Activator product. I used the product for some years, very successfully, got complacent, but I have recently started using it again. I am so happy with the product that I won’t ever get complacent again.”

– Lynn Takayama

Your solution

To seed and kickstart your septic or AWTS with a household of 1, we recommend the following products and dosage. Consistent application will ensure you live odour, blockage and worry-free.

Product

EcoCare Activator 10L
EcoCare Enhancer Kit AB

Dosage Instructions

Step 1
On the 1st morning of treatment, mix the contents of the EcoCare pH Stabiliser sachet with 1 litre of cold water, pour the mixture into the toilet and flush – the mixture may not dissolve fully and it could take a few flushes before the toilet is clear. 

Step 2
In the evening, pour the contents of the EcoCare Culture AB bottle into the toilet and flush.

Step 3
The following morning, add 4 litres of EcoCare Activator down the toilet leading into the system to kick-start the natural bacteria and waste breakdown process. 

Step 3
Add a total of 125ml of EcoCare Activator down the toilet each week to ensure your system stays healthy. 10L of EcoCare Activator will ensure your system starts smoothly and provide treatment for 48 weeks.

What makes our products different?

Whilst we know specialty bacteria are essential for system seeding, we know that the underlying cause of most wastewater issues are poor biological conditions within the system that kill the bacteria necessary for waste breakdown. 

Our solution contains specialty bacteria as well as nutrients, minerals and amino acids that allow these bacteria to rapidly multiply. 

EcoCare’s Biological Stimulant Technology introduces select nutrients, minerals and amino acids that improve biological conditions, overcome the damage caused by everyday household chemicals and allow beneficial bacteria to maintain healthy populations. This is what allows septic systems to operate at peak performance and minimises the need for pump outs and expensive repairs.

Preventative maintenance and treatment is the best way to keep your septic or AWTS operating smoothly without odours or blockages and to reduce pump outs. We’ve been helping people live odour and blockage free for over 20 years.

Within your system there’s an optimal balance which allows the beneficial bacteria inside to thrive and efficiently break down waste. Inconsistent usage, harsh cleaning chemicals, pump outs, fluctuations in temperature and water levels all disrupt the ecosystem in your tank and contribute to poor performance.

Without the optimal conditions present, populations of beneficial bacteria begin to die off, your system starts to smell and if left unattended, blockages soon follow.

The simplest and most cost-effective solution is to boost your system’s beneficial bacteria with a biological stimulant based additive. EcoCare’s proven solutions contain micro and macro nutrients that allow your beneficial bacteria to rapidly multiply and restore your system to peak performance.

“I have been a customer for more than 20 years using EcoCare Activator and never had a problem with my septic system, no smell, no blocking just performing perfectly. I also use Activator for washing floors bathrooms stain removal etc. I highly recommend it to anyone that a septic system or just want a natural eco friendly cleaning system.”

– Sherene Braun

“11years ago we were told that we would need to replace the septic at around $15-20,000 on our newly purchased property. Instead we took a chance on a product we’d seen advertised in a newspaper at the time. It is called EcoCare. It took about 6 months to get the septic system healthy again and now 11 years later we have still have not had to replace our septic system. Hard to believe myself. Great product and wonderful after purchase service if you have any questions.”

– Lynne Parry

Your solution

To treat and maintain your septic or AWTS with a household of 6 or more, we recommend the following products and dosage. Consistent application will ensure you live odour, blockage and worry-free.

Product

EcoCare Activator 20L
EcoCare Enhancer Kit AB

Dosage Instructions

Step 1
On the 1st morning of treatment, mix the contents of the EcoCare pH Stabiliser sachet with 1 litre of cold water, pour the mixture into the toilet and flush – the mixture may not dissolve fully and it could take a few flushes before the toilet is clear. 

Step 2
In the evening, pour the contents of the EcoCare Culture AB bottle into the toilet and flush.

Step 3
Add a total of 750ml of EcoCare Activator down the toilet each week to ensure your system stays healthy. 20L of EcoCare Activator will treat and maintain your system for 27 weeks.

What makes our products different?

Most septic, AWTS or greywater treatment products use bacteria or enzymes to improve system performance. Whilst we do provide specialty bacteria, we know that the underlying cause of most wastewater issues are poor biological conditions within the system that kill the bacteria necessary for waste breakdown.

Our solution contains specialty bacteria as well as nutrients, minerals and amino acids that allow these bacteria to rapidly multiply.

EcoCare’s Biological Stimulant Technology introduces select nutrients, minerals and amino acids that improve biological conditions, overcome the damage caused by everyday household chemicals and allow beneficial bacteria to maintain healthy populations. This is what allows septic systems to operate at peak performance and minimises the need for pump outs and expensive repairs.

Preventative maintenance and treatment is the best way to keep your septic or AWTS operating smoothly without odours or blockages and to reduce pump outs. We’ve been helping people live odour and blockage free for over 20 years.

Within your system there’s an optimal balance which allows the beneficial bacteria inside to thrive and efficiently break down waste. Inconsistent usage, harsh cleaning chemicals, pump outs, fluctuations in temperature and water levels all disrupt the ecosystem in your tank and contribute to poor performance.

Without the optimal conditions present, populations of beneficial bacteria begin to die off, your system starts to smell and if left unattended, blockages soon follow.

The simplest and most cost-effective solution is to boost your system’s beneficial bacteria with a biological stimulant based additive. EcoCare’s proven solutions contain micro and macro nutrients that allow your beneficial bacteria to rapidly multiply and restore your system to peak performance.

“I have been a customer for more than 20 years using EcoCare Activator and never had a problem with my septic system, no smell, no blocking just performing perfectly. I also use Activator for washing floors bathrooms stain removal etc. I highly recommend it to anyone that a septic system or just want a natural eco friendly cleaning system.”

– Sherene Braun

“11years ago we were told that we would need to replace the septic at around $15-20,000 on our newly purchased property. Instead we took a chance on a product we’d seen advertised in a newspaper at the time. It is called EcoCare. It took about 6 months to get the septic system healthy again and now 11 years later we have still have not had to replace our septic system. Hard to believe myself. Great product and wonderful after purchase service if you have any questions.”

– Lynne Parry

Your solution

To treat and maintain your septic or AWTS with a household of 5, we recommend the following products and dosage. Consistent application will ensure you live odour, blockage and worry-free.

Product

EcoCare Activator 20L
EcoCare Enhancer Kit AB

Dosage Instructions

Step 1
On the 1st morning of treatment, mix the contents of the EcoCare pH Stabiliser sachet with 1 litre of cold water, pour the mixture into the toilet and flush – the mixture may not dissolve fully and it could take a few flushes before the toilet is clear. 

Step 2
In the evening, pour the contents of the EcoCare Culture AB bottle into the toilet and flush.

Step 3
Add a total of 625ml of EcoCare Activator down the toilet each week to ensure your system stays healthy. 20L of EcoCare Activator will treat and maintain your system for 32 weeks.

What makes our products different?

Most septic, AWTS or greywater treatment products use bacteria or enzymes to improve system performance. Whilst we do provide specialty bacteria, we know that the underlying cause of most wastewater issues are poor biological conditions within the system that kill the bacteria necessary for waste breakdown.

Our solution contains specialty bacteria as well as nutrients, minerals and amino acids that allow these bacteria to rapidly multiply.

EcoCare’s Biological Stimulant Technology introduces select nutrients, minerals and amino acids that improve biological conditions, overcome the damage caused by everyday household chemicals and allow beneficial bacteria to maintain healthy populations. This is what allows septic systems to operate at peak performance and minimises the need for pump outs and expensive repairs.