Activator – Commercial

People use EcoCare Activator for wastewater management, odour control and cleaning because:

• Restores system efficiency and prevents future problems
• Destroys odours at the source and prevents them from returning
• Dissolves blockages
• Reduces BOD and suspended solids
• Reduces system maintenance requirements
• Compensates for use of harsh chemicals and sanitizers
• Cleaning capabilities enhance not hinder performance of waste systems
• Non toxic and biodegradable
• Creates a safe, healthy environment
• Australian made

Odours will be eliminated in as little as 3 days.

Most blockages will be removed in as little as 1 week, more severe blockages may take longer depending on the variables affecting your system.

EcoCare Activator is used in all types of commercial wastewater systems including septic tanks, grease traps, grey water systems and aerated water treatment systems (AWTS).

Avoid contact with skin, eyes, and mouth. If irritation occurs, rinse with plenty of water for several minutes. If SWALLOWED: drink plenty of water to dilute. Seek medical advice if feeling unwell or if irritation persists. Wash any contaminated clothing before reusing.

For best results avoid harsh chemical cleaners and caustic agents, and maintain drains and wastewater system condition by using Ecocare Activator as a cleaner.

On-site system/Absorption Trench
Add an initial prime of 4 litres of Activator per tank via toilets and drains leading into the system. For systems with multiple tanks or tanks larger than 6,000L consult your supplier for application rates.

Continue with a maintenance program of 1 litre of Activator per 50 users per week (no less than 750mL weekly).

A minimum period of 3-4 months is required to restore absorption trenches.

Drains
Add 250mL of Activator mixed with 250mL of water to malodorous or blocked drains daily until cleared. For best results apply to drain and leave overnight.

Odour Control
Dilute 50mL Activator per 1L water (1:10) to neutralise odour from dry waste or compost heaps.

Spray affected area liberally as required.

Effluent Ponds
For initial conditioning of ponds in poor condition consult your supplier. A healthy pond requires 1L of Activator per 20,000L of incoming waste. If pH fluctuates outside range of pH 6.5 to pH 8.5 consult your supplier.

Landfills
Spray Landfill sites daily with 1 litre of Activator per 1,000 m3

General Cleaning
Dilute 200mL Activator per 1 litre water (1:5) for general cleaning of hard surfaces including ablutions, urinals, toilets, showers, sinks, benches, tiles, walls and floors. Spray on to the surface and rinse off after up to 30 minutes. For high pressure cleaning dilute up to 1:100.

For commercial applications EcoCare Activator is available in 5L, 10L, 20L, 200L, and 1000L sizes.

The amount needed to solve your septic issue varies according to the number of users and the underlying cause of your problem. As septic systems vary greatly in their design, it’s best if we have a quick phone consultation to make sure you get the best solution.

Keep container lid closed when not in use. Store in a cool area below 30˚C. Do not store in direct sunlight.