Activator V

People use EcoCare Activator-V to restore and maintain their system because:

• Destroys odours, dissolves blockages, restores drainage and reduces the frequency of costly pump outs
• Easier to handle and store
• Restores absorption trenches, therefore saving expensive repairs
• Ongoing use ensures you receive no nasty surprises
• Quick and easy application
• Creates a safe and healthy environment for you and your family
• Non toxic and biodegradable
• Australian made

Odours will be eliminated in as little as 3 days.

Most blockages will be removed in as little as 1 week, more severe blockages (including leach drains) may take longer depending on the variables affecting your system.

EcoCare Activator-V is used in all wastewater systems that includes septic tanks, grease traps, grey water systems and aerated water treatment systems (AWTS).

Avoid contact with skin, eyes, and mouth. If irritation occurs, rinse with plenty of water for several minutes. If SWALLOWED: drink plenty of water to dilute. Seek medical advice if feeling unwell or if irritation persists. Wash any contaminated clothing before reusing. Dispose of contents down the toilet if producing sour odour.

For best results, add EcoCare Activator-V at night (or during period of least usage).

Septic/AWT Systems
To remove odours and blockages, once only, flush 800 mls of Ecocare Activator-V down the toilet. Continue to add 25 mls per person to the system weekly, via toilet or drains.

Absorption Trenches
For trench blockages and odours: flush 800 mls of Ecocare Activator-V down the toilet and follow up by adding 150 mls to the system per week via toilet or drains.
A minimum of 3 litres will need to be added over a 3-4 month period to unblock trenches.

Greywater/Grease Traps
To reduce build-up and odour, add 100 mls of Ecocare Activator-V followed by 500 mls of cold water per week. For best results, add small amounts each night. Prior to first application, flush grease trap and line with cold water.

Drains
To remove blockages and destroy odours, add 50 mls of Ecocare Activator-V, followed by 500 mls of cold water, to affected drain daily until blockage is cleared and odour eliminated.

Odour Control
Dilute 1 part Ecocare Activator-V with 50 parts cold water and spray to destroy odours in rubbish bins, toilets, kennels etc. To remove odours from carpets, apply diluted Activator-V liberally, leave for 5-10 minutes, and then dab dry.

Cleaning
Dilute 1 part Ecocare Activator-V with 25 parts cold water for household cleaning.
Spray on, leave for a few minutes, and then rinse off. Suitable for use on showers, floors, toilets, sinks, tiles, windows, BBQs and all other hard surfaces.

For restoration and maintenance EcoCare Activator-V is available in 2L and 4L sizes.

The amount needed to solve your septic issue varies according to the number of people in your home and the underlying cause of your problem. As septic systems vary greatly in their design, it’s best if we have a quick phone consultation to make sure you get the best solution.

Keep container lid closed when not in use. Store in a cool area below 30˚C. Do not store in direct sunlight.